Tubular discharge spout – Scotsman Flaked Ice Machines User Manual
Page 6
Tubular Discharge Spout
Models Covered: AFE325
The main characteristic of the AF or prior MF system is the tubular discharge spout and
mushroom-topped auger. Ice is made in the normal way, but at the top of the
evaporator, the soft ice forced into a small area formed between the mushroom top and
the evaporator wall which compresses it into a dryer form. Then, as the auger turns, the
compressed ice is collected by the spout casting that is attached to the side of the
evaporator. The collected ice flows through a movable tube to the bin. A spout safety
switch is attached to the side of the tube, so if the tube becomes restricted with ice, the
tube is pushed away from the auger, tripping the switch and shutting the machine off.
Page 5
AFE325 Evaporator Schematic
Refrigeration
Tubing
Water Seal
Top Bearing
Mushroom
Auger
Bottom
Bearing
Water Inlet
Tube
Ice Outlet
Area