Scotsman Flaked Ice Machines - Manual (Page 5)

Suggested Tools
Pullers:
• 2 or 3 jaw puller – use for couplings & bearings
• Slide hammer puller – use to pull augers
Adapters to fit augers:
• Small brass flakers – 7/16 -14
• Large brass flakers – ½ - 20
• Nugget - 5/8 – 18
• MDT2 - 7/16 -14
Breaker removal
• 1/8" wire chain cut to grab cap on small brass
flakers. Not applicable to AFE424 or updated
bearing units.
Wrenches:
• ½” gear drive ratchet
for adapter & freezer
bolts
Misc:
• Snap ring pliers
• Corbin clamp pliers
Page 4
Slide Hammer with tips
Small Length of Chain
1/2" Gear Drive Wrench
Snap Ring Pliers
Corbin Hose Clamp Pliers
3-jaw puller