Scotsman Flaked Ice Machines - Manual (Page 15)

Auger Removal
1. Disconnect electrical power.
2. Shut off water supply and drain reservoir and evaporator.
3. Remove necessary panels
4. Remove ice chute cover.
5. Unscrew ice sweep.
6. The auger and breaker/bearing may now be removed
as an assembly.
a. Unscrew 4 allen head cap screws holding breaker to
evaporator.
b. Lift up on breaker and remove auger from evaporator.
Note: If the auger is stuck, the breaker must be
removed from the auger.
The breaker may be removed from the auger and
evaporator without disturbing the auger.
a. Unscrew breaker cover from breaker (left hand
threads)
b. Unscrew auger stud from top of auger.
c. Unscrew 4 allen head cap screws holding breaker to
evaporator.
d. Lift up & remove breaker from evaporator.
e. Lift up and remove auger from evaporator.
Note: If the auger is stuck use a slide hammer type puller
to pull on the auger at the threaded hole. The size of that
hole is 5/8"-18.
Page 14
Ice Sweep Removed
Remove allen head cap screws
Attach Slide Hammer