Scotsman C0322 - Manual (Page 4)

C0322 through C1030
Air and Water Cooled User Manual
November 2012
Page 3
Model Number Description
Example:
• C0322SA-1B
• C= cuber
• 03= nominal ice capacity in 100s of pounds
• 22= nominal width of cabinet
• S= Cube size. S=small or half dice cube.
M=medium or full dice cube
• A=Condenser type. A=air cooled. W=water cooled
• -1=115 60 Hz, -32=208-230 60 Hz, -3= 208-230 3
phase 60 Hz
• B=Series revision code. B=second series
Note: Listed model numbers typically include only the
first five characters of the model number.
Options:
There are several field-installed options that can be
installed at initial start up or later. They include:
• KVS, Vari-Smart Adjustable ice level system.
• KSB, SmartBoard Advanced feature board.
• KPMFA223-B, front air flow panel. Fits C0322 and
C0522. B series.
• KPMFA303-B, front air flow panel. Fits C0330,
C0530, C0630. B or C series.
• KPFMA309-B, front air flow panel. Fits C0830 and
C1030. B series.
• A39514-021 air baffle for corner locations. Fits
C0322, C0330, C0522, C0722, C0530, C0630.
• A39515-021, air baffle for corner locations. Fits
C0830 and C1030.
Some installations require bin or dispenser adapters.
Standard Bin Applications - Adapter information.
Model B222
B322 B530P,
B330P,
B530S,
HTB555 BH800,
BH801,
B842S BH900,
B948S
C0322,
C0522,
C0722 Direct fit KBT27 Not
available Not
available
C0530,
C0630,
C0830,
C1030 Does not
fit Direct fit KBT28 KBT22
Hotel Dispensers
The HD22 and HD30 are compatible with this ice
machine, no adapters are needed. Some typical
combinations include:
• HD22 – use with C0322 or C0522
• HD30 – use with C0330 or C0530
Note: All models ship with the On and Off switches
front accessible. If desired, the On and Off switches
can be covered but by changing the bezel in the front
panel’s trim strip, available from a local distributor.
Ice and Beverage Dispensers – Adapter
information
Model ID150 ID200 or ID250
C0322, C0522,
C0722
KBT42 KBT43
C0530, C0630,
C0830, C1030
Does not fit KBT44
Other Bins & Applications:
Note the drop zone and ultrasonic sensor locations in
the illustrations on the next pages.
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
performance.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specifically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specifications and
design are subject to change without notice.