Scotsman C0322 - Manual (Page 17)

C0322 through C1030
Air and Water Cooled User Manual
November 2012
Page 16
Control Switches
The On and Off switch buttons are front accessible.
To switch the machine OFF, push and release the Off
button. The machine will shut off at the end of the next
cycle. To shut the machine off immediately, push and
hold the Off button for 3 seconds.
To switch the machine ON, push and release the
On button. The machine will go through a start up
process and then resume ice making.
Control Options
There are three optional, field installed controls that
can be added to this machine.
• Vari-Smart™ adjustable ice level control
• Smart-Board™ advanced control board and data
logger
Adjustable ice level control, kit # KVS
When this option is present there is an adjustment
post and an additional indicator light to the right of the
four indicator lights mentioned above. The ultrasonic
ice level control allows the user to control the point
that the ice machine will stop making ice before the
bin or dispenser is full. Reasons for this include:
• Seasonal changes in ice used
• Planning to sanitize the bin
• Faster turnover for fresher ice
• Certain dispenser applications where maximum
ice level is not desired
Use of control
There are several positions the ice level can be set to,
including Off or Max (knob and label indicators lined
up), where it fills the bin until the standard bin control
shuts the machine off. See the kit’s instructions for
complete details.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it shuts
off the indicator light next to the adjustment post will
be On.
Note: Ice will build up in the bin or dispenser at an
angle, the distance set will be from the sensor to the
top of the ice. The sensor position is shown in the
cabinet layout diagrams.
The actual distance between the highest point of the
ice may be closer or further away than the distance
set, depending upon the angle of the ice.
Power
Status
Water
De-scale
On
Off