How to crop input pictures, Details are in: how to crop the input picture, Details are in: how to crop input picture – RGBLink VSP 737 User Manual User Manual

Page 62: System setting and operation

5. System setting and operation

How to crop on input pictures

VSP 737 User Manual 62

Firstly assure the device is powered on.

Details are in: How to Confirm the

Device is in Normal Operation.

Key operation is as below: (Factory setting parameter)

1. Tap

2. LCD screen shows:

Tap NEXT, rotate the knob, adjust cropped picture‘s width, tap NEXT to

confirm the adjusting value;

Rotate the knob again to adjust cropped picture‘s height, crop picture X

position and Y position, tap NEXT to confirm;

Note

System default picture start point（0，0）

locates at top left corner.

CROP WIDTH B:
>1024

CROP HEIGHT B:
>1024

CROP POS X B:
>0

CROP POS Y B:
>0