RGBLink VSP 737 User Manual - Manual (Page 55)

5. System setting and operation
How to setup the device
VSP 737 User Manual 55
How to Setup the Device
NO PORT NO PORT
1~4.9~12 CVBS INPUT 14.16.22.24 VGA INPUT PORT
5 SMALL PUSH
BUTTON
17.20 USB INPUT PORT
6 REMOTE CONTROL
INTERFACE
18 PREVIEW OUTPUT
7 USB PORT 19 PROGRAM OUTPUT
8 RS232 INTERFACE 25 POWER
13.15.21.23 HDMI INPUT PORT 26 SWITCH
18. Preview DVI2+VGA output port is the default preview output signal, it
mainly preview output signals via display screen, output signals are DVI
video signal and VGA video signal, user can preview on screens with
DVI/VGA port. Outputting signals via DVI-I (Use normative DVI-I port for
Preview; Compatible with VGA output, change over VGA output via
terminals.) Output resolutions are as below:
800x600_60Hz, 1024x768_60Hz, 1280x768_60 Hz,
1280x1024_60 Hz, 1366x768_60 Hz, 1440x900_60_nr Hz,
1440x900_60 Hz, 1600x1200_60 Hz, 1600x1200_60_r Hz,
1920x1080_60 Hz