RGBLink VSP 737 User Manual - Manual (Page 48)

4.Menu Orientation
MENU
VSP 737 User Manual 48
MENU ---Status
Tap Status key, and tap NEXT key, LCD screen will show the information
of previous output video signal; As the above chart shows, rotate the knob,
user can view the input format, output format, program version and
current device SN of current foresee window;
MENU ---Reset
Select Reset and tap NEXT, LCD screen has instruction if RESET is
finished.
MENU --- Language
Tap MENU to go back to the homepage. Rotate the knob to flip over the
homepage, select Language, and tap NEXT to go into adjusting. As the
chart shows, user can select the language of either English or Chinese.
MENU --- Output
Tap MENU to go back to homepage. Rotate the knob to flip over the
homepage, select Output, user can adjust on Output format, Program,
Preview or Output signal coded format (HDMI or DVI).
If select Format, it is the same as directly tapping Output Format to adjust
on output format.
Corresponding Key
Select Program in DE, tap NEXT to go into adjusting, firstly adjust DE
Setup, select ON and tap NEXT again to go into DE Setting menu, rotate
the knob to flip over the menu pages;
DE H Start: Set on horizontal ordinate; DE V Start: Set on vertical
ordinate;
DE Width: Set on width; DE Height: Set on height;
If the screen picture shows black edging, user can adjust it via this
Output Format:
>1024X768X60