RGBLink CP 3096H User Manual - Manual (Page 71)

CP 3096H User Manual 71
Number of Inputs 3
Connector Standard DVI-I Socket
Supported Resolution SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50,1080P59.94/60,1080i50,1080i59.94/60,
720p50,720p59.94/60
VESA: 800×600@60Hz, 1024×768@60Hz, 1280×
768@60Hz, 1280×1024@60Hz, 1600×1200@60Hz,
1920×1080@60Hz
Signal Level TMDS pwl,single pixel input,165MHz bandwidth
Standard HDMI 1.3
SDI Input (Optional Module)
SDI Input
Number of Inputs
3
Connector BNC
Data Rate
2.97Gb/s, 2.97/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s
and 270Mb/s
Supported Standard
SMPTE 425M (Level A and Level B), SMPTE424M, SMPTE
292M, SMPTE 259M-C and DVB-ASI
Supported Resolution
720P50, 720P60, 1080i59.94, 1080i60, 1080p23.98,
1080p24, 1080p25, 1080p29.97, 1080p30, 1080p59,
1080p59.94,
1080p60, 1080psf23.98, 1080psf24,
1080psf25, 1080psf29.97, 1080psf30
Balance
Belden 1694A cable:
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
SDI Loop Out
Number of Loop Out
3
Connector BNC
Data Rate 2.97Gb/s, 2.97/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s
and 270Mb/s
Supported Standard
SMPTE 425M (Level A and Level B), SMPTE424M, SMPTE
292M, SMPTE 259M-C and DVB-ASI
Balance
Belden 1694A cable:
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
HDMI Input (Optional Module)
Number of Inputs
3
Connector HDMI standard type A interface
Supported Resolution SMPTE: 625/25 PAL, 525/29.97 NTSC, 625/50p PAL,
525/59.94p NTSC 720p50,720p59.94/60,1080i50,