RGBLink CP 3096H User Manual - Manual (Page 48)

4. MENU Orientation
MENU
CP 3096H User Manual 48
image, flat image and test pattern.
TEST PATTERN: Test pattern setting, turn the knob, there are 66 kinds of
modes for choose.
Note: When the input comes from DVI, VGA, or SDI (input format is
progressive only), the TEST PATTERN function will be enable and ready to
operate.
FLAT COLOR: When the output mode is pure color image, choose
corresponding red, green and blue color value in this option to meet the
practical needs.
GAMMA: Gamma setting, push it to adjust the image gamma value;
Gamma values include: LINEAR, sRGB, -1.2, -1.4, -1.6, 1.2, 1.4, 1.6.
SYSTEM
Select , push the knob to confirm, show level 2 menus as
follows:
DEINTERLACE: Force Deinterlace function, can choose ―ON‖ or ―OFF‖.
ON: Force interlace for interlaced signal without effect switching, but with
effects switching for progressive signal.
OFF: No deinterlace, with effect switching.
SYSTEM INFO: System information.
MCU VER: Information of MCU version.
VIDEO VER: Information of VIDEO version.
SN: Factory serial number of CP 3096H.
TECH SUPPORT: Including sales hotline, custom service, web site, email
and telephone.
DATE&TIME: Display date or time, including the following items:
DATE: Display date.
CLOCK: Display clock.
WORK TIME: Display the working time from boot to present.