RGBLink CP 3096H User Manual - Manual (Page 47)

4. MENU Orientation
MENU
CP 3096H User Manual 47
DE H SIZE: Show the horizontal size.
DE V SIZE: Show the vertical size.
OUTPUT ADJUST: Output adjust menu, including sub-menu as follows:
DVI MODE: Can set the protocol as HDMI or DVI, default is DVI output,
HDMI signal output will enable when HDMI option checked.
DATE RANGE: DVI1 output range, can set as RGB (graphic mode or
YCbCr (video mode), RGB output scale adjustment range is 0~255, YCbCr
adjustment range is 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or closed when choose ―ON‖, user can
set H SIZE, V SIZE, H POS, V POS, V SIZE, H POLARITY and V
POLARITY.
When the signal source of the screen appear black side, can use this
function adjustment, make the image to full screen display.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
SCREEN: Screen setting, user can change the screen through the digital
setting parameters to easily change the screen size and position. Mainly
used in the LED display. Settings as follow:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
Mode: Can choose SCREEN SIZE or FULL SIZE.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
DISPLAY MODE:
MODE: Image mode selection, user can choose different output modes
according to their requirement, such as: black screen, live image, freeze