RGBLink CP 3096H User Manual - Manual (Page 64)

5. System Setup and Operation
How to Save the Parameter
CP 3096H User Manual 64
How to Save the Parameter
There are two pages and each page has 6 save modes, CP 3096H
provides 12 save modes.
1. Push the [SAVE] button, the button light turns on, and PAGE, 1 and 2
button light flash.
2. Set [PAGE], choose 1 or 2, for example, choose 1:
3. Set [BANK], light of button BANK flashes, and button 1 to 6 are on or
flash, the button on can be saved and flash will be overwrite, push the
button on to save. For example, choose 1:
4. Again push the [SAVE] button, the key light turns off, and the SAVE
function close.
SAVE TO
>PAGE: 1
BANK: 1
Push No. 1-2 To Select PAGE!
SAVE TO
PAGE: 1
>BANK: 1
Push No. 1-6 To Select BANK!
SAVE TO PAGE 1 BANK 1 Finish!