RGBLink VSP 9516S Quick Start - Manual (Page 24)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
23
How to Save the Parameter
1. Push the [SAVE/PIP1] button, the button light is on, and enable the SAVE function.
2. Turn the knob, and choose the position that will save, push the knob to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means SAVE1~10, user can push any button on to save. For
example, save to SAVE 2, push button 2, the OLED panel will show as follows after saving.
User can also push the [MENU/EFFECT] button to enter to the menu items, turn the knob to choose
, and choose to save the parameter.
4. Again push the [SAVE/PIP1] button, the button light is off, and disable the SAVE function.
SAVE TO
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite