RGBLink VSP 9516S Quick Start - Manual (Page 14)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
13
(7) Choose , and set the horizontal card, vertical card, width and height.
For example, set horizontal card as 2, vertical card as 3, width and height as 120,
shown as follows:
The setting is as follows:
(8) After setting, turn the knob, choose , push the knob to
confirm, turn the knob again, and choose . VSP 9516S
supports 8 kinds of connection modes, they are , , , , , ,
> CHOOSE CABLE PORT D
HORIZONTAL CARD 1
VERTICAL CARD 1
WIDTH 64
> CHOOSE CABLE PORT U
HORIZONTAL CARD 2
VERTICAL CARD 3
WIDTH 120
> HEIGHT 120
D PORT Offset (A/B) X 0
D PORT Offset (A/B) Y 0
DISPLAY CONNECTION >>