RGBLink VSP 9516S Quick Start - Manual (Page 16)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
15
(4) Connect Port U1 of No.1 Sending Card to LED display, the settings are the same as
Step 4 to Step 8 of “Connect the Port D or Port U of One Sending Card to LED
Display ”.
(5) Connect Port D1 of No.1 Sending Card to LED display, setting steps are as follows:
a. Turn the knob, choose , push the knob to confirm, turn the
knob, choose the sending card type, for example, choose Linsn (VSP 9516S can only
support Linsn and Colorlight sending card). Shown as follows:
b. Turn the knob, choose , push the knob to confirm, turn the
knob, choose NO.1, push the knob to confirm.
c. Turn the knob, choose , push the knob to confirm. Turn the
knob, choose , push the knob to confirm, and enter to the
to the next level menu, the OLED module show as follows:
> SENDING CARD TYPE COLOR LIGHT
SENDING CARD NO. NO.1
BRIGHTNESS 50%
QUICK CONNECTION >>
* SENDING CARD TYPE LINSN
SENDING CARD NO. NO.1
BRIGHTNESS 50%
QUICK CONNECTION >>
SENDING CARD TYPE LINSN
> SENDING CARD NO. NO.1
BRIGHTNESS 50%
QUICK CONNECTION >>
SENDING CARD TYPE LINSN
SENDING CARD NO. NO.1
BRIGHTNESS 50%
> QUICK CONNECTION >>