Research Concepts RC4000 User Manual
Page 55
RC4000 Antenna Controller
Chapter 3
Software
47
Mount Manufacturer/Model #
The software within the RC4000 is customized to account for specifics of individual mounts. A particular
mount is referred to by a two character designation with the first character typically associated with the
mount manufacturer and the second character associated with a specific mount/antenna model from that
manufacturer.
CATEGORY DESIGNATION
DESCRIPTION
Mount Manufacturer /
Letter / #
Example: V1 – Vertex 2.4m. DMK
Model Number
S1 – SweDish 1.5m. DA
A3 - AVL 1.2m. USA
N1 - Andrew 4.5m. TriFold
The RC4000's predecessor, the RC3000, supported over 200 different mount models from dozens of
manufacturers worldwide.
Navigation Sensor Options
The RC4000 may be provided with multiple navigation sensor options. Navigation sensors allow the
RC4000 to determine the mount's latitude, longitude and heading. If no navigation sensors are present,
estimates of this data may be entered manually.
CATEGORY DESIGNATOR
DESCRIPTION
Navigation Sensors
N
No Navigation Sensors supported
G
GPS & Fluxgate compass supported
A
GPS, Fluxgate and integrated DVB
receiver supported
F
GPS and DVB receiver (no compass)
C
GPS
Compass
Tracking Options
The RC4000 may provide optional support for tracking inclined orbit satellites.
CATEGORY DESIGNATOR
DESCRIPTION
Inclined Orbit
N
Tracking not supported
Tracking
T
Step & Memory Track supported
E
Step & Memory plus Two Line Element
set tracking supported
Remote Control Options
The RC4000 may provide optional support for controlling the mount from a remote (away from the front
panel) location.
CATEGORY DESIGNATOR
DESCRIPTION
Remote Control
N
No Remote Control Supported
R
Remote Monitor & Control Supported
O
Antenna Deployment Safety Interlock
P
Both Monitor & Control and
Deployment Safety Interlock
NOTE: Descriptions of the optional features are typically provided by separate appendices.
*** Receiver Options (1 & 2, Internal & External)