Research Concepts RC4000 User Manual
Page 13
RC4000 Antenna Controller
Chapter 1
Introduction
5
RECALLING STORED SATELLITES. The user may quickly and precisely move between previously
STOREd satellites via RECALL mode.
RECALL
STORED SATELLITE: BRASIL A1
SELECT SAT(SCROLL UP/DOWN)
AUTOMATIC ANTENNA STOWING. From STOW mode, the user may ask for the antenna to be
automatically moved to the stow position.
AZIM: -42.5 ( 0.0) STOW
ELEV: 23.4 (-67.5)
MOVING TO (TARGET),
Programming Group Functions
The programming group modes provide for initial configuration of the controller and also provide screens
to aid in maintenance and troubleshooting of the controller.
Configuration mode screens allow the user to customize and calibrate the operation of the RC4000 for
use with a particular mount. Note that most configuration items will be factory set for correct operation
with a particular mount.
REF_VOLT:2.50 OFF: 0.0 CONFIG-AZIM
CCW:180 CW:180 SF:76.35
SET REFERENCE VOLTAGE <2.00 - 3.00>
Maintenance mode screens allow the user to monitor sensor inputs and perform periodic maintenance
actions such as setting time and resetting drive errors.
SYSTEM:11/10/97 22:26:40 TIME
GPS UTC:11/10/97 22:26:40 ZONE:CST
DISPLAY:11/10/97 16:26:40 OFFSET:- 6
1-DATE 2-TIME 3-SYNCH 4-ZONE 5-OFFSET