5 specifications – Research Concepts RC4000 User Manual
Page 14
RC4000 Antenna Controller
Chapter 1
Introduction
6
1.5 Specifications
RC4000 BOARDSET
Physical
Size
6 1/16" x 7" x 3 3/4" (with RCI plate and RF board)
Weight 2.6
lbs.
Input Power
AC: 85 - 265 VAC, 47 - 63 Hz
DC: 20 - 28 VDC
Fusing
3 AMP Slow-Blow
Temperature
-40 / +85 deg. C.
Humidity
35% to 85% (optional special-environmental kit available)
Antenna Drive
Azimuth/Elevation/Polarization
24 VDC / 8 Amps max
Electromechanical Brakes
(optional)
28 VDC 850 mA
Position Sense
Azimuth
Potentiometer, 12-bit resolution standard; optional single phase pulse
sensors (Reed, Hall-Effect, Optical); optional resolver, 16-bit resolution
Elevation
Inclinometer, 12-bit resolution standard; optional single phase pulse sensors
(Reed, Hall-Effect, Optical); optional resolver, 16-bit resolution
Polarization
Potentiometer, 12-bit resolution standard; optional resolver, 16-bit resolution
Limit Switch Inputs
12 VDC inputs, standard: EL Up, EL Down, EL Stow, AZ Stow, Pol Stow
typical + additional inputs optional, mount dependent
Locate Mode
Elevation Accuracy
+/- 0.02 degrees (typical)
Azimuth Accuracy
+/- 0.10 degrees (typical)
Polarization Accuracy
+/- 0.08 degrees (typical)
GPS Lockup Time
0 seconds (when configured for accessory powered GPS receiver)
VSAT Mode
Single key-press-to-locate-operation for untrained operators
Autopeak Input
full L-Band power detection to find strongest signal.(configurable to AGC
voltage or Beacon receiver output -15VDC to +15VDC; 2Mohm input
impedance, two channels)
Modem Receive-Lock Input
TTL or contact closure, (optional non-invasive modem lock detector
available)
Track Mode
Antenna Size
0.4 – 12.0 meters
Tracking Accuracy
0.1 to 3.0 dB selectable; mount dependent
Maximum Inclination
16 deg., standard
Inclined Orbit Tracking Modes
Step-Track, Memory-Track, Intelli-Search™ , Program Track, optional
Ephemeris Track
Signal-Strength Input
-10 VDC to +10 VDC; 2Mohm input impedance, two channels
Non-volatile Memory Backup
Duracell DL2450