Remotec ZXT-310 V1.2 - Manual (Page 5)

5
Glossary
Device or Node
Devices and nodes are all terms to describe
an individual Z‐Wave device. These are all
interchangeable when setting up your Z‐
Wave network.
Inclusion Add a Z‐Wave device to the network.
Exclusion Delete a Z‐Wave device from the network.
Remove
To take a device out of a group, scene or
association group while that device still
exists in the same Z‐Wave network.
Z‐Wave
Network
A collection of Z‐Wave devices is controlled
by primary and secondary controllers
operating on the same system. A Z‐Wave
network has its own unique ID code so that
controllers not in the network cannot
control the system.
Primary
Controller
The first controller is used to set up your
devices and network. Only the Primary
Controller can be used to include or delete
modules from a network. It is recommended
that you mark the primary controller for
each network for ease in modifying your
network.
Network Wide
Inclusion (NWI)
Network Wide Inclusion (NWI) enables both
end‐user friendly, Plug and Play like Z‐Wave
network installation as well as professional
installation scenario where the inclusion
process in terms of time will be reduced
significantly. NWI is a feature supported by a
new frame type named Explorer which
enables the Z‐Wave protocol to implement
Adaptive Source Routing.