Remotec ZXT-310 V1.2 - Manual (Page 21)

21
Installation
Mounting the ZXT‐310 to a wall
MOUNTING LOCATION PRECAUTIONS
• Before mounting, check the material and structure of the
mounting location. If the location does not have the proper
material or structure, the ZXT‐310 can fall and cause an injury.
• Use commercial items that best match the wall structure and
material for the screws and other fixtures.
• Do not mount near a kitchen counter, humidifier, or other
location in which it can be exposed to smoke or steam. Doing so
could cause a fire or electrical shock.
• Do not mount in locations with high humidity or large amounts of
dust. Doing so could cause a fire or electrical shock.
• Do not mount to locations subject to high temperatures, high
humidity, or exposed to water. Doing so could cause a fire or
electrical shock.
• Do not mount to locations subject to large amounts of vibration,
large jolts, or large forces. These could cause an injury if the ZXT‐
310 falls and breaks.
MOUNTING PROCEDURE PRECAUTIONS
• Do not modify parts or use the ZXT‐310 in ways other than its
intended use. Doing so could cause the ZXT‐310 to fall and result
in an injury.
• Be sure to fully check that there are no electrical wires or pipes
inside the wall before mounting.
• If any of the screws are loose, the ZXT‐310 can fall and cause an
injury. Do not mount the ZXT‐310 with the screws still loose.
• Check that the two screws mounted to the wall are fully inserted
into the key holes of the ZXT‐310. Otherwise, the ZXT‐310 can fall
and cause an injury.
• Do not mount the ZXT‐310 so that it sticks out from the wall edge.
It could get hit by people’s bodies or objects and cause an injury.
• Supplier will not be liable for any accidents or injuries that occur
due to improper mounting or handling.
• When mounting, be careful not to get your fingers pinched or
injure your hands.
MOUNTING PROCEDURE
The ZXT‐310 can be mounted to a wall or wooden racks using the two
key holes in the bottom case. The ZXT‐310 can be oriented
horizontally or vertically. Mount in the best way for your installation
conditions.
Note 1: The reception sensitivity varies depending on the antenna