REMKO Multi-talent Plus - Manual (Page 24)

REMKO Heat Pump Manager
Configuration
Designation Value range Factory setting Description
Terminal address On/Off On
The BM-T is a terminal (input device). If there are
more than one terminal at the BUS, each must be
given a different terminal address.
BUS code 1 00-15 01
Heating circuits are numbered in sequence begin-
ning with "01" (heating circuit number); the same
number may not be assigned more than once.
BUS code 2 00-15 02
Heating circuits are numbered in sequence begin-
ning with "01" (heating circuit number); the same
number may not be assigned more than once.
Changing of the set specialist values is not possible until the code number has been input because setting the
values incorrectly can lead to malfunctions and damage to the system.
Level 4 - SPECIALIST - Description of parameters and settings - continued
24