REMKO Multi-talent Plus - Manual (Page 21)

Various values are summarised here in order toe enable quick access for customer service.
The input of the code number is necessary for some functions.
The relay test and sensor test are automatically reset after 1 minute!
Sensor test no.
Sensor no. REMKO
Sensor
designa-
tion Terminal
layout in the
indoor unit Description
01 Buffer tank temperature bottom
02 Buffer tank temperature middle (or room temperature Heating circuit 1)
03 Buffer tank temperature top
04 not used
05 F5 X3.16 Supply temperature heating circuit 2 (mixer circuit)
06 F6 X3.15 Hot water temperature top (process water tank)
07 not used
08 F8 X3.14 Collector temperature (collective supply temperature sensor)
09 F9 X3.13 Outdoor temperature
10 not used
11 F11 X3.12
For CMF 80/90/140/150 and CMT 100/150:
Supply temperature heating circuit 1 (direct heating circuit) or
for CMF/CMT 120 and CMF/CMT 160:
Supply temperature heat pump
12 F12 X3.11 Hot water temperature bottom (reference sensor for solar regulation)
13 F13 X3.10 not yet used (solid material WE temperature (PT1000))
14 F14 X3.9
Collector temperature solar system (special control characteristic
(PT 1000))
15 F15 X3.8 Flow meter
16 not used
17 F17 X3.7 Return temperature sensor
Level 4 - SERVICE - Description of parameters and settings
21