beautypg.com

Remko pww, Accessory installation anti-frost thermostat fs – REMKO PWW Series User Manual

Page 14

background image

14

REMKO PWW

Mixed-air box MLK

The mixed-air box MLK is desi-
gned for both wall and ceiling
mounting.
The ratio of fresh air to recirculated
air can be continuously adjusted
manually or with a flap servomotor
(accessory).
With the supplied variable cover,
the direction of the air on the inlet
side can be freely selected.
For operation of the mixed-air box
with flap servomotor, the mixed-
air flaps must be checked regularly
for easy movement and fouling.

Filter box FK

The filter box with pocket filter is
designed for direct mounting on
the units.
The pocket filter can be removed
from the side.
The filter medium of the pocket
filter can be regenerated and has
the filter class G3.
Further filter classes are available
on request.

Filter maintenance

Depending on the operating con-
ditions, the pocket filter must be
checked regularly and cleaned or
replaced if necessary.

Automatic monitoring

The degree of clogging of the
pocket filter can be monitored
via a differential pressure switch
(special accessory).

When the final pressure difference
is reached, the filters must be
replaced with filters with the same
quality class.

Accessory installation

Anti-frost thermostat FS

The anti-frost thermostat is a
precise water temperature sensor,
which can be subsequently moun-
ted on the surface of pipes.

The thermostat is fitted with a
precision sensitive switch.
The supplied strap with clamp
enables easy subsequent fitting
without draining the heating sys-
tem.

Installation

Prior to fitting, the pipe insulation
in the contact area of the sensor
must be removed.

The parts required for fitting, e.g.
strap or clamp, etc., are supplied
with the unit.

Contact 1
opens with a rise of temperature.
Contact 2
closes with a rise of temperature.

Technical data:
Setting range 25 to 95°C
Switching difference adjustable.
Maximum ambient temperature
70°C.

1

C

ϑ

2

Wiring diagram

NOtE

In order to ensure perfect func-
tioning of the freeze protection
control, the sensor must al-
ways be mounted at the water
outlet (return).

Spare pocket filter EF:

PWW 30 EDP No. 385405
PWW 50 EDP No. 385406
PWW 80 EDP No. 385407
PWW 100 EDP No. 385408

installation

Fastening of the mixed-air and
filter box takes place with the sup-
plied mounting clips (4 pieces).

Mounting clips