REMKO PWW Series - Manual (Page 11)

11
PWW
c
in mm
Blowing range W in metres
30 166 6 m 1.- Setting 9 m 2.- Setting
50 166 8 m 1.- Setting 11 m 2.- Setting
80 166 10 m 1.- Setting 13 m 2.- Setting
100 236 12 m 1.- Setting 15 m 2.- Setting
Air outlet accessories
Standard type
The units are provided with horizontal, individually
adjustable air outlet fins as standard.
■ The fins can easily be removed by unclipping.
Air outlet shutter B
Vertical, individually adjustable air outlet fins for
wall and ceiling use.
The air outlet shutter B is mounted directly in front of the horizon-
tal air outlet fins.
Use of the shutter enables a high blowing range.
The unit depth increases by 115 mm in the case of all unit types.
■ Retrofitting is easily possible.
Air outlet hood HG 4
This air outlet hood serves uniform air distribution in four directions
at low mounting heights.
The air outlet hood is not suitable for mounting hoods above 4 m.
■ For retrofitting, the standard horizontal air outlet fins of the unit
must be removed.
Ceiling air outlet nozzle AD
The ceiling air outlet nozzle serves for concentrated control of the
hot air stream and must be used at mounting heights above 4 m in
high halls.
■ For retrofitting, the standard horizontal air outlet fins of the unit
must be removed.
PWW
c
in mm
Blowing range W in metres
30 200 5.0 m 1.- Setting 6.5 m 2.- Setting
50 230 5.5 m 1.- Setting 6.5 m 2.- Setting
80 270 5.5 m 1.- Setting 7.0 m 2.- Setting
100 290 7.0 m 1.- Setting 9.0 m 2.- Setting
We reserve the right to make changes to dimensions and design in the interest of technical advances.
c
W
W
c
W W