REMKO CLK 80-RV - Manual (Page 23)

23
technical data
We reserve the right to modify the dimensions and design as part of the ongoing technical development process.
1) At ∆
t 45K / 1.2 kg/m 3 )
2) The specified nozzle sizes and pump pressures are based on test bench results.
The oil flow rate was derived from this.
Based on the product-specific nozzle and pressure tolerances as well as the oil temperature, the specifications should only be
considered guidelines.
3) Noise level measurement (with hose and without burner operation) DIN 45635 - 01 - KL 3
4) Only with intake ports (accessories) for recirculating or mixed air operation
Unit type CLK 80-RV CLK 170-RV
Max. nominal heating capacity kW 84 155
Nominal heat capacity kW 77 143
Nominal flow rate 1) m 3 /h 6,140 10,340
(Max. total) pressure Pa 410 520
Fuel Heating oil EL acc. to DIN 51603-1 or diesel fuel
Max. fuel consumption l/h 8.3 15.5
Danfoss oil nozzle 2) USg 1.75 / 60°S 3.00 / 80°S
Pump pressure, approx. 2) bar 12 13
Max. exhaust gas loss % 9 9
Exhaust gas flow, approx. kg/h 136 240
Combustion chamber resistance, approx. Pa 100 110
Required chimney draft Pa 0 0
Power supply V/Hz 230/1~/50 400/3~N / 50
Max. power consumption (complete unit) kW 1.75 3.4
Max. nominal current (complete unit) A 9.5 8.0
Max. power consumption (Multiflex oil preheating) W -- 30
Customer-provided electrical protection A 16 16
Temperature increase (∆
t
) K 48 54
Sound pressure level L
pA
1m 3) dB (A) 62 65
Air outlet Ø mm 400 500
Air intake Ø 4) mm 2 x 400 2 x 500
Exhaust gas nozzles Ø mm 150 200
Dimensions: Length mm 2,000 2,380
Width mm 800 920
Height mm 1,160 1,350
Weight with forced-air oil burner kg 234 375
EDP no.: (with/without oil burner) 131300/131100 131700/131500