Posiflex JIVA KS-7717 - Manual (Page 7)

Part 7
e) Integrated rear base mount devices:
LCD 2x20 pole display: PD-306/U, PD-309
LCD 2x20 rear top mount display: PD-310/A
VFD 2x20 pole display: PD-2602/U, PD-2605/U
VFD 2x20 rear top mount display: PD-2604/A
Graphics LCD display: PD-76X2/PD-76X4
12” second LCD monitor: LM-6101B
15” second LCD monitor: LM-8015/LM-8025/LM-8035/TM-
8045/LM-8055
f) Preload OS: Win 7, POSReady 7, POSReady 2009, Win XP Pro
g) Wireless LAN adaptor in USB interface: 802.11 b/g/n
h) UPS Battery: 2300mAh/12V
i) Optional mini PCIE for WiFi module
INSTALLATION GUIDES
CAUTION: Before any installation or cable connection to the set,
please always make certain that the system is turned off and the
external power source to the set is removed to prevent electric hazard!
Never touch any metal pin in the connectors or circuits to avoid high
voltage hazard or electrostatic discharge damage unless the operator is
well grounded. Failure to do the above will void the product warranty!
TECHNICAL MANEUVERS
Some technical maneuvers for this terminal such as serial COM port
+5V/+12V power supply settings and VGA port +12V power supply setting
are supported in system BIOS or Jumper setting. Nevertheless, such support is
limited to the applications of specific Posiflex peripherals and must be disabled
when the Posiflex peripherals are disconnected. Failure to follow the
discipline would result in electric or fire hazard and such consequences
are not covered by product warranty!
OPENING CABLE COVER
Please follow steps sequentially with reference to pictures below to remove the
cable cover.
For Gen 6
th
base
Step A: Turn panel backward to most horizontal position
Step B: Pull at the removal hollow toward the user