Posiflex JIVA KS-7717 - Manual (Page 13)

Part 13
CAUTION: On doing any insertion or extraction of any connector, please
always hold the connector head itself instead of pulling on the
cable wire. Failure to do this could damage the cable and jack
that is considered as an artificial destruction and is not
covered by the warranty.
WALL MOUNTING
The wall mount model is delivered without any base but with a wall mount kit.
Please follow the installation guide that comes with the wall mount bracket to
fix the wall mount bracket on wall and then hang the main unit with the
matching pegs into the matching holes on wall mount bracket.
Please note that since there is no base for the wall mount model there can be
no base installed device nor base mount kit. The area required for wall mount
application is determined by the main unit dimensions and is 378 mm in width
and 312 mm in height.
UPGRADE WALL MOUNT KIT
There is an upgrade wall mount kit coded as SK-200 that supports an omni-
directional Laser bar code scanner as a derivation from the basic wall mount
bracket WB-6000VB. With this kit, the Laser scanner is installed under the KS
system. Please follow the instructions that come with this kit to install and to
utilize it.
OPERATING SYSTEM RECOVERY
For KS systems preloaded with Windows XP Pro/ POS Ready/ Win 7/ POS
Ready 7 on HDD, Posiflex provides recovery DVD delivered with the touch
terminal for the preloaded operating system. The System Integrator shall take
care of software restoration after OS being recovered. A Posiflex supplied
USB interface COMBO drive will be required for such action. Other brand
CDROM drives may require their own driver different from what is supported
in the recovery DVD.
Please use the recovery DVD in rescue operation only. Using it otherwise
may wipe out whatever stored in the HDD! All upgrade devices drivers
WB-6000VB