HP DeskJet 3700 - Manual (Page 44)

Copy documents
NOTE: All documents are copied in normal quality print mode. You cannot change the print mode quality
when copying.
To copy documents
1. Load paper in the input tray.
For information about how to load paper, see Load media on page 10 .
2. Load the original print side up, fully justified to the right side of the scanner, until it feeds into the scan
path and the scan light turns on.
3.
Press either the Start Copy Black button ( ) or the Start Copy Color button ( ) to make a copy.
You can increase the number of copies by pressing the button multiple times fast within two seconds.
If the original is not pulled in, push it into the scan path by hand until it moves on its own.
The scanner automatically feeds the original for scanning. Printing for copy starts after scanning is
complete.
40 Chapter 5 Copy and scan ENWW