OWON AG1022 - Manual (Page 37)

9.Technical Specifications
9. Technical Specifications
All these specifications apply to the the waveform generator described in this
document except for special explanation. To reach these specifications, the
instrument must have been operating continuously for more than 30 minutes within
the specified operating temperature.
All the specifications are guaranteed unless those marked with “typical”.
Waveforms
Standard Waveforms
Sine, Square, Ramp, Pulse, Noise, DC
Arbitrary Waveforms
Exponential rise, Exponential fall, Sin(x)/x,
Staircase, etc. 26 built-in waveforms,
User-Definable Waveform
Numbers of channel 2
Frequency Characteristic
(Max sampling rate 125MSa/s, frequency resolution 1 μHz)
Sine
AG1022 1 μHz—25MHz
AG1012 1 μHz—10MHz
Square 1 μHz—5MHz
Ramp 1 μHz—1MHz
Pulse 1 μHz—5MHz
White Noise 25MHz bandwidth (
-
3dB) (typical)
Arbitrary 1 μHz—10MHz
Amplitude Characteristic
Output Amplitude
High Z
AG1022 1 μHz to 10 MHz:
1mVPP-20VPP
10 MHz to 25 MHz:
1mVPP-10VPP
AG1012 1 μHz to 10 MHz：
1mVPP-20VPP
50Ω
AG1022 1 μHz to 10 MHz:
0.5mVPP-10VPP
10 MHz to 25 MHz:
0.5mVPP-5VPP
AG1012 1 μHz to 10 MHz：
0.5mVPP-10VPP
Amplitude Accuracy 1mVPP or 14 bits
DC Offset Range (AC+DC)
±5V (50Ω)
±10V (High Z)
DC Offset Accuracy 1mV
Output Impedance 50Ω (typical)
32