OWON AG1022 - Manual (Page 12)

4.Quick Start
⑤ Fuse Use the specified fuse according to the voltage scale.
⑥ Power switch Switch between 110V and 220V.
⑦ USB Host port Connect as a "host device" with an external USB device,
such as connect a USB disk to the instrument.
⑧ USB Device port Connect as a "slave device" with an external device, such
as connected to a PC and controlled via PC software.
User Interface
④
⑨
⑧
③
⑦
② ①
⑥ ⑤
⑩
⑪
Figure 4-3 User interface (take Sine for instance)
① Current channel
② Parameter 1, display parameter and edit the focused parameter
③ Current signal type or mode
④ The setting menu of current signal or mode
⑤ Parameter 3, display parameter and edit the focused parameter
⑥ Parameter 2, display parameter and edit the focused parameter
⑦ Display current waveform
⑧ Offset/low level, depends on the highlighted menu item on the right
⑨ Amplitude/high level, depends on the highlighted menu item on the right
⑩ Frequency/period, depends on the highlighted menu item on the right
⑪ Load, High Z represents high resistance
7