OpenEye CM-135 - Manual (Page 35)

Troubleshooting
If you have trouble operating your camera, refer to the following table. If the information provided in this manual
does not enable you to solve the problem, contact an authorized technician.
Problem Solutions
Nothing appears on the
screen Check that the power cord and line connection between the camera and
monitor are fixed properly.
Check that you have properly connected the VIDEO cable to the camera
VIDEO output jack. •
•
The image on the screen is
dim Is the lens dirty? Clean your lens with a soft, clean cloth.
Change the monitor settings
If the camera is exposed to too strong light, change the camera position.
Adjust the lens’ focus. •
•
•
•
The image on the screen is
dark Adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75
Ω / Hi-z properly.
Adjust the DC level on the OSD menu.
•
•
•
The camera is not working
properly, and the surface
of the camera is hot. Check that you have properly connected the camera to an appropriate
power source. •
The image on the screen
flickers Is the camera facing direct sunlight or fluorescent lighting? Change the
camera position. •