OpenEye GraniteRack 3U - Manual (Page 81)

Configuring
3-43
3.9.5 SNMP Configuration
The SNMP gives users independence from the proprietary network management
schemes of some manufacturers and SNMP is supported by many WAN and LAN
manufacturers enabling true LAN/ WAN management integration.
To set the SNMP function, move the cursor bar to the main menu and click
on he SNMP Configuration. The Raid System SNMP Function menu will
show all items. Select the desired function.
SNMP Trap Configurations:
Type the SNMP Trap IP Address. The Port de-
fault is 162.
SNMP System Configuration:
Community: The default is Public.
(1)sysContact.0; (2)sysLocation.0; (3)sysName.0: SNMP parameter (31 bytes
max). If this 3 categories are selected during initial setting then when an error
occurs SNMP will send out a message that includes the 3 categories within