OpenEye GraniteRack 3U - Manual (Page 4)

About This Manual
Welcome to your Redundant Array of Independent Disks System User’s Guide.
This manual covers everything you need to know in learning how to install or
configure your RAID system. This manual also assumes that you know the basic
concepts of RAID technology. It includes the following information :
Chapter 1 Introduction
Introduces you to Disk Array’s features and general technology concepts.
Chapter 2 Getting Started
Helps user to identify parts of the Disk Array and prepare the hardware for configuration.
Chapter 3 Configuring
Quick Setup
Provides a simple way to setup your Disk Array.
Customizing Setup
Provides step-by-step instructions to help you to do setup or re-configure your Disk Array.
Chapter 4 Array Maintenance
Adding Cache Memory
Provides a detailed procedure to increase cache memory from the default amount of 128MB to
higher.
Updating Firmware
Provides step-by-step instructions to help you to update the firmware to the latest version.
Hot Swap Components
Describes all hot swap modules on Disk Array and provides the detailed procedure to replace
them.