OpenEye GraniteRack 3U - Manual (Page 51)

Configuring
3-13
Physical Drives
Create Pass Through Disk
Delete Pass Through Disk
Identify Selected Drive
Select The Drives
Select The Drives
Select The Drives
Delete Pass Through
Are you sure? Yes, No
Select The Drives
Modify Pass Through Disk
View Drive Information
SCSI Channel, SCSI ID,
SCSI LUN, Cache Mode,
Tag Queuing, Max Sync Rate
Select The Drives SCSI Channel, SCSI ID,
SCSI LUN, Cache Mode,
Tag Queuing, Max Sync Rate
Yes, No
Mute The Alert Beeper
Raid System Function
Alert Beeper Setting
Change Password
Raid Rebuild Priority
Update Firmware
Restart Controller
Save The Settings
Disabled, Enabled
Yes, No
Enter New Password
Re-Enter Password
Save The Password
Save The Settings Yes, No
UltraLow(5%), Low(20%),
Medium(50%),High(80%)
Are you sure? Yes, No
Yes, No
Terminal Port Config
Baud Rate 1200,2400,4800,9600,
19200,38400,57600,115200
Stop Bits 1 bit, 2 bits
Yes, No
JBOD / RAID Function
RAID, JBOD
Configured AS JBOD?
Are you sure?
Yes, No
Yes, No
Yes, No