NCast PR-HD - Manual (Page 8)

NCast Presentation Recorder Reference Manual
1.6. P RESENTATION R ECORDERS – C ONNECTOR O PTIONS
The following diagram describes the back-panel connectors available:
Backpanel for PR-HD-Basic-M, PR-HD-Basic-P
• Serial Control – Wired control from a touch panel, such as Crestron or AMX
• Ethernet – Connection to the Internet
• XLR Audio – Balanced XLR input connector and additionally a balanced 0.25” connector
• VGA – Input from the presenter's PC
• VGA Loopback – VGA output, usually to the room projector
• VGA/Component Out – RGBHV or Y-Pb-Pr output to the local display
• USB – For specifying a static IP connection with a USB drive or saving an archive file
• Line-In, Line-Out, Mic-In - Unbalanced 3.5 mm. audio connections. Stereo for Line-In, Line-Out
• HDMI – Video input from cameras or computers, audio not supported
• DVI-D – Digital input
• DVI-A – Analog RGBHV input or Y-Pb-Pr component from a camera source
• Displayport – Input from the Displayport output of a computer
• SDI – 3G-SDI Serial Digital Input
• Composite – NTSC or PAL input
Note: Conversion of HDMI or DVI signals to Displayport requires an active (not passive) adapter.
NCast Corporation Revision 2.2
Page 8