NavCom RT-3010 Rev.F - Manual (Page 56)

RT-3010 User Guide – Rev. F
Damp equipment must be dried at a temperature less
than +40
°C (104°F), but greater than 5°C (41°F) at
the earliest opportunity.
External Power Source
If the RT-3010 is used with the optional external
power cable (P/N 94-310060-3010), it must be
connected to the chosen external power solution in
accordance with Chapter 2 Interfacing\Electrical
Power. It is important that the external power source
allow sufficient current draw for proper operation.
Insufficient supplied current will cause damage to the
external power source.
If the chosen external power source is a disposable
battery, please dispose of the battery in accordance
with local regulations.
Battery Packs
The RT-3010 GPS sensor is supplied with two
lithium-ion battery packs.
Charge the battery packs only with the
supplied battery charger (P/N 92-
310046-3001) and supplied charger
power supply (P/N 82-02003-5001);
otherwise, damage to the battery
packs could occur.
Do not store battery packs above 60
°C
(140
° F) or below -20°C (-4° F).
Do not disassemble or modify battery
packs; there are no user serviceable
parts inside.
The battery contains safety and
protection devices, which if damaged,
5-54