NavCom RT-3010 Rev.F - Manual (Page 26)

RT-3010 User Guide – Rev. F
1-24
„ Data
Sampling
GPS L1 and L2 raw measurement data is up to 5Hz
in the standard configuration. An optional upgrade
allows 10, 25, and 50Hz raw measurement data via
either of the two serial ports.
The PVT (Position, Velocity, & Time) data is output at
up to 5 Hz in the standard configuration. An optional
upgrade allows 10 and 25Hz position updates for
highly dynamic applications.
„ GPS
Performance
The RT-3010 utilizes NavCom’s NCT-2100 GPS
engine, which incorporates several patented
innovations. The engine’s industry leading receiver
sensitivity provides more than 50% signal to noise
ratio advantage over competing technologies. This
results in improved real time positioning, proven
through independent tests, when facing various
multipath environments.
„ Rugged
Design
Units have been tested to conform to MIL-STD-810F
for low pressure, solar radiation, rain, humidity, salt-
fog, sand, and dust.
The rugged design of the RT-3010 system
components provides protection against the harsh
environments common to areas such as construction
sites.