NavCom RT-3010 Rev.F - Manual (Page 19)

RT-3010 User Guide – Rev. F
1-17
Chapter 1 .............................. Introduction
System Overview
GPS Sensor System
The RT-3010 GPS sensor
delivers unmatched
accuracy to the precise
positioning community. This
unique receiver is designed to integrate easily in
RTK, field data verification, topographical surveys,
and a wide variety of surveying applications. The
system resolves ambiguities at startup or on satell
reacquisition typically within 2 seconds.
to
ite
The RT-3010 has a built-in spread spectrum radio
(SSR). The receiver may be configured as a tripod
mounted RTK base station or RTK rover. It is capable
of NCT RTK/UltraRTK™
1 , RTCM (code and phase),
and CMR/CMR+ DGPS operating methods.
The RT-3010 integrated sensor consists of:
9 All-in-one housing incorporates compact GPS
antenna and built-in spread spectrum radio
(SSR)
9 24-channel, dual-frequency, precision GPS
receiver
9 2 separate SBAS channels, RTCA/DO-229D
compliant (WAAS/EGNOS/MSAS/GAGAN)
Refer to Table 1, later in this chapter, for the
complete list of supplied equipment.
1
Requires NCT-2100D Engine