beautypg.com

Table 5: battery status indication – NavCom RT-3010 Rev.F User Manual

Page 33

background image

RT-3010 User Guide – Rev. F

„ Battery

LEDs

‡

The battery LEDs are software configurable
via the appropriate NavCom proprietary
command. Table 5 describes the factory
default LED states.

‡

Batteries are not charged in the unit. If
external power is applied, the battery LEDs
indicate the status of the batteries, not the
external power source.

‡

Depress the

button on the indicator

panel to check the status of the battery
charge (see Table 5).

Table 5: Battery Status Indication

Battery Status

Battery Not Installed, or
Installed Battery Is Drained

Greater Than 80% Charge

60% - 80% Charge

40% - 60% Charge

20% - 40% Charge

Less Than 20% Charge

(Solid; No Blink Rate)

In Use

LED(s) Blink Rate at 5Hz

Not In Use

LED(s) Blink Rate at 1Hz

2-31