beautypg.com

Communication port connectivity, Figure 9: radio port configuration, starutil – NavCom RT-3010 Rev.F User Manual

Page 44

background image

RT-3010 User Guide – Rev. F

‡

Use StarUtil to configure the internal
radio port as the output port for RTK
corrections. Select Port Radio from the
NCT RTK drop-down list (see Figure 9).
This is the setting also for NCT
UltraRTK™. The corrections can be
simultaneously sent to any of the logical
ports, and also the internal MMC Memory
Module for logging. Described in the
StarUtil User Guide (see Related
Documents
in the fore-matter).

Figure 9: Radio Port Configuration, StarUtil

Communication Port Connectivity

Connect the supplied LEMO 7-Pin connector of the
serial cable (P/N 94-310090-3003) to COM 2 (factory
default Control Port) of the RT-3010. Connect the
DB9 end to the control device.

‡

Some devices may require an additional
adapter. The receiver is configured as a DCE
device.

3-42