beautypg.com

Table 7: base station indication – NavCom RT-3010 Rev.F User Manual

Page 34

background image

RT-3010 User Guide – Rev. F

„ Link

LEDs

‡

The Link LEDs are software
configurable via the x3f proprietary
command. The factory default
configuration is Rover Mode. The Link
LEDs are not used in Base Mode.

Table 6: Link LED Indication (Default Rover Mode)

LINK Status

Command Mode

Repeating Red to Amber to Green indicates
Searching for base radio signal

C/No - Strong Signal Strength from base
radio

C/No - Medium Signal from base radio

C/No - Weak Signal Strength from base
radio

„ Base

LEDs

Table 7: Base Station Indication

BASE Status

The following BASE LEDs reflect the type of RTK
corrections when the RT-3010 is operated as a
Base Station

RTK/UltraRTK™ - NCT Proprietary

CMR

RTCM, 20,21; 18,19

2-32