MovinCool CM12 - Manual (Page 17)

17
FEATURES
CM12 Features
• Built-in condensation removal pump
• Built-in mounting bracket
• Built-in flange for supply and return air (room air) - 10.0 inch diameter, 2.8 inch
deep cylinder for easy installation
• Fire alarm control panel connection with automatic shut off
• Automatic shut off and warning signal output and alarm for
• Condensation Overflow
• Unit Failure (no cooling)
• Temperature Sensor Failure
INSPECTION & MAINTENANCE
Cleaning Air Filters
The air filter on the evaporator return grill should be checked weekly for dust
buildup.
Clean or replace air filter on a weekly basis. If the unit is used in a dusty
environment, more frequent cleaning may be required.
A dirty air filter can reduce the air output, resulting in a decrease in cooling
capacity.
Cleaning Condenser Air Intake
Inspect and remove dust buildup on the condenser air intake of the unit with a
vacuum cleaner periodically to prevent insufficient cooling.
Ground Fault Breaker Testing
The ground fault breaker should be tested at least once a month.