Power supply requirements, Service panel access, Power supply requirements service panel access – MovinCool CM12 User Manual
Page 10: Installation (cont.)
10
INSTALLATION (cont.)
Power Supply Requirements
• The CM12 requires a single-phase 115 V, 60 Hz power supply to operate.
• The power supply should be a dedicated single outlet circuit with a UL approved
short-circuit and ground fault protective breaker with a fuse size of 20 A maximum.
Service Panel Access
1. Access service panel by
removing 4 screws.
Tightening torque for screw: 1.10
ft•lbf (1.5 N•m)
2. Remove the service panel.
CIRCUIT BREAKER WITH
GROUND-FAULT PROTECTIVE
FUSE 20 A MAX.
R
T
G
R
T
G
TERMINAL BLOCK OF CM12
GROUND TERMINAL