Montigo H42DF ST - Manual (Page 25)

H*42DF ST Indoor Gas Fireplace
Page 25
XG0237 - 150204.1
Installation
Figure 23. Log "A" & "B" Installation.
Installing the Logs and Embers
Bottom Logs
The H*42DF*-ST is supplied with eight (8) fibre logs. The two bottom
logs ("A" & "B") are mounted on the burner grate as shown in Figure 23.
Top Logs
Place logs "C" into their diagonal positions as shown in Figure 23b. Logs
"E" are mounted on top of logs "A" , "B", "C" & "D" as shown in Figure 24c.
Figure 23b. Log "D" Installation.
Figure 23a. Log "C" Installation.
Log B
Log C
Log D
Log A
Log C
Log D
Front of Fireplace
Figure 23c. Completed Installation.
Installing the Ember Material
The ember material is supplied in two packages. Place the material
evenly within the internal area of the burner, next to logs 'A' and 'B'.
Refer to figure 23a. Ensure that the burner holes of the burner are not
covered and the flame pattern burns properly after placing the embers.
Log E
Log E
Section 9: Installing the Accessories
If logs are not placed properly, excessive sooting will result.
NOTICE