MicroLinks UM05 - user manual User Manual

Page 56

Microscope Application Program http://www.ViTiny.com

Fig.5-47 Setting scale dialog

 Scale default file
 Scale default file will depend on each model which has different default

setting. Such as: “Default Low Magnification” and “Default Height
Magnification” shown in Fig.5-48

Fig.5-48 Scale default File

When the microscope is observing object with contacted distance, it has two

focus points. Thus, it will have two kinds of scale value which are for low and

high mag. The default value is used for the fixed height, which means the

distance from device to object does not change. If the default value is not right for

the user, the scale value can reset or create a file for new value by calibrate the
horizontal and vertical scale according to the user’s preferences.

If want to return to the default file, check “Scale default” box than it will

return back to two default files and the other files will be deleted.
 Create a new scale file

Click “new” button than it will pop up shown in Fig.5-52 a dialog box and

input new scale name.