Main function buttons, Connect/disconnect, Connect – MicroLinks UM05 - user manual User Manual

Page 24: Disconnect, Snapshot, Save image

Microscope Application Program http://www.ViTiny.com

Main Function Buttons

Main function button group see Fig.1-4 which are commonly used or basic function, which
includes connecting, taking pictures, saving, editing…etc. there are 10 functions button.

3.1 Connect/Disconnect

3.1.1Connect

The connect icon is as Fig.3-1, the user will connect the line while pushing the

connect button, namely connect with MICROSCOPE device. If it cannot connect, please

reinsert MICROSCOPE device to the other USB port.

Fig.3-1 Connect button icon

3.1.2 Disconnect

The button icon which shows disconnect is like Fig.3-2, by clicking this button to

disconnect. When the user starts to play the video, MICROSCOPE will be disconnected

automatically. When re-connecting the MICROSCOPE with the AP, the video format will go

back to the default value.

Fig.3-2 Disconnect button icon

3.2 Snapshot

Snapshot icon is as Fig.3-1, the function allows taking a photo in Preview, Video & Play,

and image size depends on Video Format source, i.e. Height & Width.

Fig 3-3 Snapshot button icon

3.3 Save Image

Save image icon is as Fig.3-4, the saved file name is automatically created. The detail of

the file name is as description 1.1.2.