MicroLinks UM05 - user manual User Manual

Page 50

Microscope Application Program http://www.ViTiny.com

Fig. 5-31 Calibrator

The picture shown as Fig. 5-31 is calibrator. The main purpose for the Cross is to

calibrate the program and also as a measurement. The Cross (See above chart c) has 3

kinds of units as 0.05mm, 0.1mm and 1mm scale. It will measure 0.05mm, 0.1mm

at high magnification and 0.1mm, 1mm at low magnification. The Cross can

measure the Length and Width accurately, ie.: Fig.5-34, Measure the length of the

onion cell as the red rectangle which is approximate 0.400mm.

Fig.5-32 The Cross

The more precise ruler, the more accurate measurement can be obtained under high magnification.

The use “metal ruler” and “calibrator” the biggest difference is as follows:

 When the magnification is high, use the calibrator can easily and accurately

knows the scale range.

6.1

3.5

0.6

1.1

0.9

0.8

1.3

1.5

1.7

1.9

2.9

2.7

2.5

2.3

2.1

3.1

3.3

3.7

3.9

4.9

4.7

4.5

4.3

4.1

5.1

5.3

5.5

5.7

5.9

6.9

6.7

6.5

6.3

6.2

6.4

6.6

6.8

5.8

5.6

5.4

5.2

4.2

4.4

4.6

4.8

3.8

3.6

3.4

3.2

2.2

2.4

2.6

2.8

1.8

1.6

1.4

1.2

0.7

1.1

0.9

0.8

1.3

1.5

1.7

1.9

2.9

2.7

2.5

2.3

2.1

3.1

3.3

3.5

3.7

3.9

4.9

4.7

4.5

4.3

4.1

5.1

5.3

5.5

5.7

5.9

6.9

6.7

6.5

6.3

6.1

6.2

6.4

6.6

6.8

5.8

5.6

5.4

5.2

4.2

4.4

4.6

4.8

3.8

3.6

3.4

3.2

2.2

2.4

2.6

2.8

1.8

1.6

1.4

1.2

1.1
0.9

0.8

1.3

1.5

1.7

1.9

2.9
2.7
2.5
2.3
2.1

3.1

3.3

3.5

3.7

3.9

4.9
4.7
4.5
4.3
4.1

5.1

5.3

5.5

5.7

5.9

6.9
6.7
6.5
6.3
6.1

6.2

6.4

6.6

6.8

5.8
5.6
5.4
5.2

4.2

4.4

4.6

4.8

3.8
3.6
3.4
3.2

2.2

2.4

2.6

2.8

1.8
1.6
1.4
1.2

1.2
1.4
1.6
1.8

2.8

2.6

2.4

2.2

3.2
3.4
3.6
3.8

4.8

4.6

4.4

4.2

5.2
5.4
5.6
5.8

6.8

6.6

6.4

6.2

6.1
6.3
6.5
6.7
6.9

5.9

5.7

5.5

5.3

5.1

4.1
4.3
4.5
4.7
4.9

3.9

3.7

3.5

3.3

3.1

2.1
2.3
2.5
2.7
2.9

1.9

1.7

1.5

1.3

0.8

0.6

0.7
0.9
1.1

6.1

3.5

0.6

1.1

0.9

0.8

1.3

1.5

1.7

1.9

2.9

2.7

2.5

2.3

2.1

3.1

3.3

3.7

3.9

4.9

4.7

4.5

4.3

4.1

5.1

5.3

5.5

5.7

5.9

6.9

6.7

6.5

6.3

6.2

6.4

6.6

6.8

5.8

5.6

5.4

5.2

4.2

4.4

4.6

4.8

3.8

3.6

3.4

3.2

2.2

2.4

2.6

2.8

1.8

1.6

1.4

1.2

0.7

1.1

0.9

0.8

1.3

1.5

1.7

1.9

2.9

2.7

2.5

2.3

2.1

3.1

3.3

3.5

3.7

3.9

4.9

4.7

4.5

4.3

4.1

5.1

5.3

5.5

5.7

5.9

6.9

6.7

6.5

6.3

6.1

6.2

6.4

6.6

6.8

5.8

5.6

5.4

5.2

4.2

4.4

4.6

4.8

3.8

3.6

3.4

3.2

2.2

2.4

2.6

2.8

1.8

1.6

1.4

1.2