Fig 2-21 time lapse setting dialogue, Convert video to image – MicroLinks UM05 - user manual User Manual

Page 17

Microscope Application Program http://www.ViTiny.com

Fig 2-21 Time Lapse setting dialogue

 Start time：To set the start time to enable the function. The unit can be second

or minute.

 Time Interval：To set time to capture image or video. The unit can be second,

minute or hour.

 File numbers：To decide how many image/video needs to be captured.
 Record Time: To decide the video record time.
 Total time: To calculate the total time to execute the function.
 Save scale: To decide to save the scale when BMP or JPG format.
 Save file format as: To decide the file type. (BMP, JPG or AVI)
 JPG quality: To decide the JPG compressed quality.
 Video compress: To choose the compressor type when record AVI file. It is

suggested to choose “DivX Codec”.

 Folder name and position:

 Auto-generated: Auto generated folder name by yyyy-mm-dd-hh-min-sec.
 Manual Keyin：Key in folder name
 Assign folder: To assign the file save into certain folder. Click “Save file”

to choose route.

 Folder name: To show the folder name, the captured files will be saved in this

folder.

 Save file: To choose the captured file saving location.
 File save at: To show the location of saved folder.
 Execute: Enable time lapse function.
 Cancel: Disable time lapse dialogue.

2.4.4 Convert Video to Image