MicroLinks UM05 - user manual - Manual (Page 48)

Microscope Application Program http://www.ViTiny.com
48
Copyright © 2008-2012 MicroLinks Technology Corp.
Fig. 5-27 auto mode control
5.4 Measurement mode
Measurement mode provide a scale which can be draw ruler and to measure observation
object. Another way is to Freeze frame or loading image after then measuring. The
measurement toolbar has line, circular, rectangle etc. Also, it can show length, area, radius,
diameter, etc, information. Fig.5-28. is measurement mode; its toolbar is shown in Fig.5-29.
Fig.5-28 Measurement mode
Fig.5-29 Measurement mode toolbar
Before measuring, make sure to calibrate the scale, please note “scale setting
” the
explanation.
5.4.1 Freeze frame “
”
This function can let the previewing video image to freeze. Once the image freezes.
5.4.2 Load image “
”
The image which was captured before can be reloaded again. Users can use the
measurement function after reloading the image
5.4.3 Save image “
”
After measuring, it can save image by clicking “save image “
” button. The save
file name will be marked as vertical and horizontal scale. If want to load the image to do
measurement, then just click “scale setting” “ ” button to set vertical and horizontal scale,
and these scale of value form file name. If file name has v420h560 of string means horizontal