MicroLinks UM05 - user manual User Manual

Page 52

Microscope Application Program http://www.ViTiny.com

Contacted

Non-Contacted

Fig.5-34 Contacted and Non-Contacted

Based on the above steps it can measure horizontal and vertical scale. Several

examples as follows:

EX1: Measurement for non-contact object.

Use the “metal ruler” as a measurement base, the machine and the observation

object has distance, the focus of the video image is clear. Image shown in Fig.5-35

and Fig.5-36 is the result after measurement, horizontal and vertical scale range is

24.2mm and 18.1mm.

Fig.5-35 Horizontal scale range is

24.2mm

Fig.5-36 Vertical scale range is

18.1mm

EX2: Measurement for contacted object in low mag.

Use the “metal ruler” for measurement of the base, the machine and the

observation object of distance is close, the focus of the video image is clear.

Image shown in Fig.5-40 and Fig.5-41 is the result after measurement, horizontal

and vertical scale range is 5.60mm and 4.20mm.